Our test and demonstration case has been developed to test and show all GENSYS 2.0 MARINE’s type of applications. Inputs/outputs are wired on switch or lamps. Connections are made with a 230 VAC outlet.

This demonstration kit, built in flight case, combines reliability, technicality and a real sales add value for product demonstration.

The RDM 2.0 MARINE works as a remote display and, combined with the GENSYS 2.0 CORE MARINE, can control a single or a multiple generating sets power plant.
Connected to a GENSYS 2.0 MARINE, the RDM 2.0 MARINE can be used as an additional remote module.
RDM 2.0 MARINE screen displays the same data as the GENSYS 2.0 MARINE. The display shows engine and electrical parameters for intuitive operation.

Information display:

• Engine parameters display: oil pressure, water temp, speed, hours run meter…
• Generator electrical parameters display:
• Phase-phase Voltage (3 phase RMS)
• Phase-neutral Voltage (3 phase RMS)
• Current (3 phase RMS)
• Frequency
• Active power (3 phase + total)
• Reactive power (3 phase + total)
• Power factor (3 phase + total)
• Active power energy (kWh)
• Reactive power energy (kVARh)
• Mains electrical parameters display:
• Phase-phase Voltage (3 phase RMS)
• Current (3 phase)
• Frequency
• Active power and reactive power
• Power factor
• Import active power energy (kWh)
• Import reactive power energy (kVARh)
• User display:
• 50 spare display lines.

The GENSYS 2.0 CORE MARINE is an easy-to-use rear-mounted, control and paralleling module which can synchronize up to 32 generators.
GENSYS 2.0 CORE MARINE is configured with CRE Config software or via its embedded Web site.

PROGRAMMING BY EQUATIONS:
The GENSYS 2.0 CORE MARINE module is a real PLC unit where equations and sequences can be programmed directly by the user with a Easy PLC software or a simple text editor software.

INPUTS / OUTPUTS EXTENSION:
The number of inputs/outputs that can be added is one of the most important on the market. Extension modules (DIN rail mounting) can be added on the CAN bus. This extends a large number and a large diversity of inputs/outputs up to 128 digital inputs, 64 digital outputs, 44 analog inputs, 32 analog outputs and CANopen standard module.

MINIMUM OPTIONS:
The GENSYS 2.0 CORE MARINE is offered full features with a minimum of options to fit all types of application without expensive add-on packages.
For specific needs, the following options are available:

• Phase shift compensation (ie: Dyn11)

INTER-UNIT ISOLATED CAN BUS
The GENSYS 2.0 CORE MARINE features an isolated CAN bus dedicated to inter-module communication (dead busbar management, static paralleling, kW and kVAR load sharing…).
CAN bus technology provides high reliability communication while maintaining low wiring cost and complexity.

The GENSYS 2.0 Marine is a control unit designed for marine generator switchboards panels.
This Power Management System unit combines all necessary functions:

• Engine start/stop and protections,
• Alternator control and protections,
• Mechanical & electricial parameters display,
• Generator synchronization,
• Load sharing and kW control/kVAR control,
• Breaker control,
• Synchronization with bus bar,
• kW and kVAR Load/ Unload Management,
• Tie breaker control,
• Non essential, Modbus TCP,
• Load sharing redondancy and heavy consumer fonction.

GENSYS 2.0 Marine is configurable via its front panel or via a PC with CRE Config software.

The GENSYS 2.0 CORE MASTER MARINE is a marine controller developed to synchronize gensets with shore connection or to synchronize both sides of a power plant split by a bus tie breaker. GENSYS 2.0 CORE MASTER MARINE includes:

• Multi bus tie breaker management,
• Shore breaker & shore synchronization management,
• Load transfer with shore power,
• Three phase shore power failure detection,
• Black start & blackout management,Phase compensation.

GENSYS 2.0 CORE MASTER MARINE is type approved by major Marine certification organization.

RDM 2.0 MASTER MARINE

The RDM 2.0 MASTER MARINE works as a remote display and, combined with the GENSYS 2.0 CORE MARINE or GENSYS 2.0 CORE MASTER MARINE, it offers a control panel and display to manage a complete power plant. The display shows all live parameters for intuitive operation, and let the customer access the manual operation through the keys.

As RDM 2.0 is an independant display, it has no impact on the control system, and can be switched off or disconnected safely.