Ons assortiment
Of het nu gaat om hydroliek, elektronica of een combinatie van deze. HB Technologie is thuis in de materie, zowel voor nieuwbouw als revisie. Ook kunt u bij HB Technologie terecht voor reparatie en revisie van Barber-Colman apparatuur. Uiteraard ondersteunen wij ook vele andere leidende merken. Informeer vandaag nog bij ons naar de mogelijkheden voor uw project.

 Our assortment
Whether it concerns hydraulics, electronics or a combination of these, HB Technologie is at home in the matter, both for new construction or overhaul. You can also contact HB Technologie for repair and overhaul of Barber-Colman equipment. Of course we also support many other leading brands.  Contact us today about the possibilities for your project

2
Yes
None
1
1000000
Zoeken...
/producten/
Thumbnail

Categorieën:

Paralleling
GENSYS COMPACT PRIME New paralleling product
GENSYS COMPACT PRIME New paralleling product Image

The Gensys COMPACT PRIME is a new panel-mounted generator controller fit for standby application.
This new generation of controller is optimized for its ease of use. It’s small size and simple features enable an easy installation and configuration for up to 32 generators in island-parallel. GENSYS COMPACT PRIME will benefit from years of GENSYS 2.0 experience.

A SIMPLE PRODUCT WITH ADVANCED FEATURES
GENSYS COMPACT PRIME offers a fully compatible with all speed governors and AVRs, J1939 communication with electronic engines, isolated speed and AVR outputs and 3 isolated communication ports : 2 CAN bus, 1 Ethernet

BENEFITS
GENSYS COMPACT PRIME offers a less wiring and components, less engineering & programming, less commissioning and troubleshooting. It also allows up to 32 generator in parallel.

COMPATIBILITY
Thanks to its versatile connectivity the GENSYS COMPACT PRIME is compatible with peripheral devices:

  • Electronic engines: CAN bus J1939
  • Speed governors: ±10 VDC /Pulse
  • AVR: ± 10 VDC /Pulse
  • Modbus TCP
  • I/O extensions: CANopen  (up to 32 IOs)

APPLICATIONS WITH GENSYS COMPACT

  • Diesel generators
  • Synchronization and power management module
  • 2 to 32 generators in parallel & static paralleling
UNIGEN2.0 PMS
UNIGEN2.0 PMS Image

The UNIGENs 2.0 PMS is used for prime mover applications that require synchronization, load sharing, load/unload management, protections as well as paralleling features.The UNIGEN 2.0 PMS can be used to parallel up to 32 gensets together using CAN bus communication. Moreover, UNIGEN 2.0 PMS can also be used to parallel a single genset with the mains. One unit is needed per generating set. Intuitive settings to configure each function needed.

Features:

  •     « Help » on configuration
  •     Excitation control for static paralleling
  •     Mains paralleling features (Base Load, Peak shaving, no break change over)
  •     Load/Unload dependant start/stop
  •     SCADA Vizualisation on the front face
  •     Full settings management on the front face
  •     TCP Modbus Communication (Local or network access. Read and write functions.)
  •     Easy to use connection with CRE Config software
  •     External digital input/output through CanOpen communication, (32 DI / 32 DO)
  •     Speed control through J1939 Can Bus Communication
  •     Electrical protections (Battery, Voltage, Current, Frequency, kW, kVar, Reverse Power, Rocof, Vector Jump)
  •     A real breaker control
UNIGEN2.0 ILS
UNIGEN2.0 ILS Image

The UNIGENs 2.0 ILS is used for prime mover applications that require load sharing, load/unload management, and associated protections.The UNIGEN 2.0 ILS can be used to parallel up to 32 gensets together using CAN bus communication.

Features:

  • Excitation control for static paralleling
  • Load/Unload dependant start/stop
  • SCADA Vizualisation on the front face
  • Full settings management on the front face
  • TCP Modbus Communication (Local or network access. Read and write functions.)
  • Easy to use connection with CRE Config software
  • External digital input/output through CanOpen communication, (32 DI / 32 DO)
  • Speed control through J1939 CAN Bus Communication
  • Electrical protections (Battery, Voltage, Current, Frequency, kW, kVar, Reverse Power)
UNIGEN2.0 SYNCHRO
UNIGEN2.0 SYNCHRO Image

The UNIGENs 2.0 SYNCHRO is used for prime mover applications that require synchronization, and associated protections. The UNIGEN 2.0 SYNCHRO can control on Speed/Frequency and on Voltage, thank to analogue or digital output control.

Features:

  • Synch check relay
  • Phase sequence protection
  • SCADA Vizualisation on the front face
  • Full settings management on the front face
  • TCP Modbus Communication (Local or network access. Read and write functions)
  • Easy to use connection with CRE Config software
  • External digital input/output through CanOpen communication, (32 DI / 32 DO)
  • Speed control through J1939 CAN Bus Communication
  • Electrical protections (Battery, Voltage, Frequency)
  • UNIGEN 2.0 SYNCHRO connected on CANBus can control dead bus management

UNIGEN 2.0 SYNCHRO  can be controlled externally on Frequency and Voltage by pulse contacts inputs.

MASTER2.0 All-in-one mains parallaling unit with integrated PLC
MASTER2.0 All-in-one mains parallaling unit with integrated PLC Image

The Master 2.0 is a power plant controller for gensets in parallel with one or several mains.

This “all-in-one” unit includes all necessary functions:

  • Multi mains management
  • Three phase mains failure detection
  • Electrical protection
  • Electrical parameters display
  • Manual and automatic paralleling with mains (frequency, phase and voltage)
  • kW power management with several modes:
    • No break change over with load transfer
    • Permanent paralleling in base load
    • Permanent paralleling in peak shaving mode
  • Power factor control when paralleling with mains.
  • Dyn11 capabilities(HV phase compensation)
  • Analog control for all load sharing modules.
RDM2.0 Remote display module for all-in-one generatort control & paralleling unit
RDM2.0 Remote display module for all-in-one generatort control & paralleling unit Image

The RDM 2.0 works as a remote display and, combined with the GENSYS 2.0 CORE, can control a single or a multiple generating sets power plant.
Connected to a GENSYS 2.0, a GENSY 2.0 LT or a MASTER 2.0, the RDM 2.0 can be used as an additional remote display.
RDM 2.0 screen displays the same data as the GENSYS 2.0. The display shows engine and electrical parameters for intuitive operation.

• RDM 2.0 to be connected to the GENSYS 2.0 CORE
• RDM 2.0 can be used as an additional remote display with the GENSY 2.0, the GENSYS 2.0 LT or with the MASTER 2.0
• Same multi-function graphic display and same front panel as the GENSYS 2.0

GENSYS 2.0 CORE Control unit for all-in-one gensent control & paralleling unit with integrated PLC
GENSYS 2.0 CORE Control unit for all-in-one gensent control & paralleling unit with integrated PLC Image

The GENSYS 2.0 CORE is an easy-to-use rear-mounted, control and paralleling module which can synchronize up to 32 generators.
The modules are designed to work with independent remote display module RDM 2.0 screens which are connected by ethernet.

GENSYS 2.0 CORE is configured with CRE Config software or via embedded website.
The kit GENSYS 2.0 CORE and RDM 2.0 has the same properties as the GENSYS 2.0 and allows several power plant possibilities.

It is an extendable system that can be optimized to your space facility.

DUOGEN Two gensets controlled by a single unit
DUOGEN Two gensets controlled by a single unit Image

Duogen is a microprocessor based single module which gathers the control of two generators.

DUOGEN carries out manual and auto synchronization, isochronous load sharing or droop load sharing. DUOGEN integrates the following features:
– 1 Digital input for auto synchronization
– 1 Sync check relay is checking phase, frequency and voltage differences
– 1 “Load shedding” output relay is calling for need of power, allowing a better power plant global efficiency
– 2 Isochronous kW sharing controls
– 2 Iso-voltage kVAR sharing controls
– 2 Reverse power protections

UNIGEN Generating set Auto Synchroniser and load sharer
UNIGEN Generating set Auto Synchroniser and load sharer Image

Applications:
– Isochronous load sharing in island mode or in parallel with mains
UNIGEN can be used to parallel up to 8 gensets together. One UNIGEN is needed per generator set.
– Mobile gensets
With its digital “Super Droop” function, unique on the market, UNIGEN makes the mobile gensets coupling simple.

Advantages:
– Super Droop (digital), only +/- 0.25Hz
– Compatible with all speed governors
– Compatible with all AVR
– All the settings are adjusted with potentiometers
– CAN bus “plug & play”

UNIGEN PLUS Generating set Auto Synchroniser and load sharer
UNIGEN PLUS Generating set Auto Synchroniser and load sharer Image

Applications:
– Isochronous load sharing in island mode or in parallel with mains.
UNIGEN will be used on generator sets that require synchronising, load sharing and paralleling features.
UNIGEN can be used to parallel either a single genset with mains or up to 8 gensets together. One UNIGEN is needed per generator set. UNIGEN combined with the GCR (CRE Load Commander) can control very complex power plants with several mains.
– Mobile gensets
With its digital “Super Droop” function, unique on the market, UNIGEN makes the mobile gensets coupling simple.

Advantages:
– SUPER DROOP (digital), only +/- 0.25Hz
– Compatible with all speed governors
– Compatible with all AVR
– Compatible with modules using paralleling lines 0-3V
– All the settings are adjusted with potentiometers
– Modbus with read and write functions

UNIGEN ILS Isochronous load sharing in island mode or in parallel with mains
UNIGEN ILS Isochronous load sharing in island mode or in parallel with mains Image

Advantages:

  • DROOP (analog)
  • Possibility of load sharing with Droop. Curve is compatible with Barber Colman Droop.
  • Compatible with Barber Colman load sharers
  • UNIGEN ILS is equipped with an analogue output for speed control.
  • Compatibility with all electronic speed governors
  • Compatibility with all AVR
  • UNIGEN is equipped with an analogue output (+/-10V adjustable)and is in this way compatible with all AVR.
  • Compatible with modules using paralleling lines 0-3V
  • ALL the settings are adjusted with potentiometers
  • No computer needed!!

Functions:
– Manual Synchronisation
– Power load sharer
– Forward power relay
– Reverse Power protection
– Analogue Power output

GENSYS COMPACT PRIME Demonstration Suitecase Kit
GENSYS COMPACT PRIME Demonstration Suitecase Kit Image

Our test and demonstration case has been developed to test and show all GENSYS COMPACT PRIME’s type of applications. Inputs/outputs are wired on switch or lamps. Connections are made with a 230 VAC outlet.

This demonstration kit, built in flight case, combines reliability, technicality and a real sales add value for product demonstration.

GENSYS2.0 LT All-in-one genset control & paralleling unit
GENSYS2.0 LT All-in-one genset control & paralleling unit Image

The GENSYS 2.0 LT is a control unit designed for generator electrical panels.

This “all-in-one” unit combines all necessary functions:

  • Three phase mains failure
  • Engine start/stop and protections
  • Alternator control and protections
  • Mechanical parameters display
  • Electrical parameters display
  • Genset synchronization
  • Load sharing and kW control
  • Load sharing and kVAR control
  • J1939 comport management
  • SD card software upgrade

GENSYS 2.0 LT is configurable via its front panel or via a PC with CRE Config Software.
The GENSYS 2.0 LT controller has analog load sharing lines and is compatible with all types of analog load sharing modules.

GENSYS 2.0 Paralleling unit with integrated PLC
GENSYS 2.0 Paralleling unit with integrated PLC Image

The GENSYS 2.0 is a control unit designed for generator electrical panels.
This “all-in-one” unit combines all necessary functions:

  • Three phases mains failure
  • Engine start/stop and protections
  • Alternator control and protections
  • Mechanical parameters display
  • Electrical parameters display
  • Genset synchronization
  • Load sharing and kW control
  • Load sharing and kVAR control
  • J1939 communications

GENSYS 2.0 is configurable via its front panel or via a PC with CRE Config software. It has an embedded Web site which is password protected.
The GENSYS 2.0 controller has analog load sharing lines and is compatible with most of the types of analog load sharing modules.

BSD 2.0 Remote monitoring box
BSD 2.0 Remote monitoring box Image
BSD 2.0 is a remote monitoring and controle box for GENSYS COMPACT PRIME and GENSYS 2.0 application. It communicates via GSM/GPRS/3G using a SIM card – compatible with most of the worldwide network – or over wired Ethernet. Data are saved on a server.
The server offers pages presenting the values on widgets, plotting them for trending, and handling the alarms/faults (filtering). Datas are accessible through customer profiles from any plateform (PC, phone, tablet…).
Characteristics:
  • Cloud technology
  • No license costs
  • Plug’n play for a fast operation
  • Email notifications of alarms/faults
  • Theft notice (geo-fencing)
  • Mimic based on widgets
  • Access profiles
GENSYS COMPACT MAINS All-in-one generator controller & mains paralleling unit
GENSYS COMPACT MAINS All-in-one generator controller & mains paralleling unit Image
The GENSYS COMPACT MAINS is a new panel-mounted generator controller fit for standby application. This new generation of controller is optimized for its ease of use. The GENSYS COMPACT MAINS benefit from years of CRE TECHNOLOGY experience in mains paralleling with standby genset, whatever it is permanent paralleling, automatic mains failure detection or no break transfer.
The GENSYS COMPACT MAINS offers a fully compatible module with all speed governors and AVRs and J1939 communication with electronic engines. Isolated speed and AVR outputs and 3 isolated communication ports: 2 for CAN bus, 1 for Ethernet.
Benefits
GENSYS COMPACT MAINS offers you money and time saving thanks to its simple wiring, no optional components, and easy engineering & programming.
Compatibility
Thanks to its versatile connectivity the GENSYS COMPACT MAINS is compatible with peripheral devices:
  • ECU: CAN bus J1939
  • Modbus TCP: SCADA or PLC
  • CANopen devices (up to 32 digital inputs/ouputs)
  • Secondary regulators:
    • Speed governors: ± 10 VDC/Pulse
    • AVR/DVR: ± 10 VDC/Pulse
GENSYS 2.0 Demonstration Suitecase
GENSYS 2.0 Demonstration Suitecase Image

Our test and demonstration case has been developed to test and show all GENSYS 2.0’s type of applications. Inputs/outputs are wired on switch or lamps. Connections are made with a 230 VAC outlet.

This demonstration kit, built in flight case, combines reliability, technicality and a real sales add value for product demonstration.

CPA Three-phase active power converter
CPA Three-phase active power converter Image

The active power converter CPA measures the positive or negative power of a three-phase source with or without neutral.

Designed to operate with versions GPRII & GPRIII load commander for generating set applications, it is suitable for any application requiring a measurement and a conversion of power into -/+20mA signal.

SCR2.0 Synchroscope - Synch check relay
SCR2.0 Synchroscope - Synch check relay Image

The SCR2.0 is a microprocessor controlled synchroscope with programmable synch check relay in a DIN96 front panel mounted package. It monitors the voltage and frequency of 2 independent power networks as well as the instantaneous phase angle between them.

The measured parameters are displayed on the 3 digit digital display. The 24 led circular synchroscope displays the phase angle between the 2 networks. The synchroscope display is only activated if both network voltages are within the set limits.

GCR Digital power plant commander
GCR Digital power plant commander Image

The GCR allows the synchronizing, the coupling and the power control of one or several generating sets in parallel with one or several commercial powers.

It can be used with the synchronisers and load-sharing modules from Barber Colman & Woodward and permits permanent or temporary paralleling.

The GCR  is easily adjustable and configurable by its integrated screen and keyboard, or by a PC through its serial port.

Characteristics:

  • CE Mark: The GCR is in conformity with the European CE Mark requirements.
  • Weight & size: 3.5kg – 330 x 219x 58

Product in 100, 230 and 400 VAC

C2S Auto synchroniser & safety column
C2S Auto synchroniser & safety column Image

This second generation of microprocessor module combines all the visualization and control functions needed to couple a generator to a bus bar manually: display of the phase, frequency and voltage differences, a safety relay which monitors these three parameters and indicates the status of the  installation.
This new version does not need an external DC power supply, as it takes it from the busbar. The reduced size allows the use of DIN92 format tools and its heavy duty metal case can operate in extreme environment.

Product in 100, 230 and 400 VAC

Paralleling
GENSYS COMPACT PRIME New paralleling product Image
GENSYS COMPACT PRIME New paralleling product
The Gensys COMPACT PRIME is a new panel-mounted generator controller fit for standby application. This new generation of controller is optimized for its ease of use. It’s small size and sim... Lees meer
UNIGEN2.0 PMS Image
UNIGEN2.0 PMS
The UNIGENs 2.0 PMS is used for prime mover applications that require synchronization, load sharing, load/unload management, protections as well as paralleling features.The UNIGEN 2.0 PMS can be us... Lees meer
UNIGEN2.0 ILS Image
UNIGEN2.0 ILS
The UNIGENs 2.0 ILS is used for prime mover applications that require load sharing, load/unload management, and associated protections.The UNIGEN 2.0 ILS can be used to parallel up to 32 gensets to... Lees meer
UNIGEN2.0 SYNCHRO Image
UNIGEN2.0 SYNCHRO
The UNIGENs 2.0 SYNCHRO is used for prime mover applications that require synchronization, and associated protections. The UNIGEN 2.0 SYNCHRO can control on Speed/Frequency and on Voltage, thank to... Lees meer
MASTER2.0 All-in-one mains parallaling unit with integrated PLC Image
MASTER2.0 All-in-one mains parallaling unit with integrated PLC
The Master 2.0 is a power plant controller for gensets in parallel with one or several mains. This “all-in-one” unit includes all necessary functions: Multi mains management... Lees meer
RDM2.0 Remote display module for all-in-one generatort control & paralleling unit Image
RDM2.0 Remote display module for all-in-one generatort control & paralleling unit
The RDM 2.0 works as a remote display and, combined with the GENSYS 2.0 CORE, can control a single or a multiple generating sets power plant. Connected to a GENSYS 2.0, a GENSY 2.0 LT or a MA... Lees meer
GENSYS 2.0 CORE Control unit for all-in-one gensent control & paralleling unit with integrated PLC Image
GENSYS 2.0 CORE Control unit for all-in-one gensent control & paralleling unit with integrated PLC
The GENSYS 2.0 CORE is an easy-to-use rear-mounted, control and paralleling module which can synchronize up to 32 generators. The modules are designed to work with independent remote display ... Lees meer
DUOGEN Two gensets controlled by a single unit Image
DUOGEN Two gensets controlled by a single unit
Duogen is a microprocessor based single module which gathers the control of two generators. DUOGEN carries out manual and auto synchronization, isochronous load sharing or droop load sharing... Lees meer
UNIGEN Generating set Auto Synchroniser and load sharer Image
UNIGEN Generating set Auto Synchroniser and load sharer
Applications: – Isochronous load sharing in island mode or in parallel with mains UNIGEN can be used to parallel up to 8 gensets together. One UNIGEN is needed per generato... Lees meer
UNIGEN PLUS Generating set Auto Synchroniser and load sharer Image
UNIGEN PLUS Generating set Auto Synchroniser and load sharer
Applications: – Isochronous load sharing in island mode or in parallel with mains. UNIGEN will be used on generator sets that require synchronising, load sharing and parall... Lees meer
UNIGEN ILS Isochronous load sharing in island mode or in parallel with mains Image
UNIGEN ILS Isochronous load sharing in island mode or in parallel with mains
Advantages: DROOP (analog) Possibility of load sharing with Droop. Curve is compatible with Barber Colman Droop. Compatible with Barber Colman load sharers... Lees meer
GENSYS COMPACT PRIME Demonstration Suitecase Kit Image
GENSYS COMPACT PRIME Demonstration Suitecase Kit
Our test and demonstration case has been developed to test and show all GENSYS COMPACT PRIME’s type of applications. Inputs/outputs are wired on switch or lamps. Connections are made with a 2... Lees meer
GENSYS2.0 LT All-in-one genset control & paralleling unit Image
GENSYS2.0 LT All-in-one genset control & paralleling unit
The GENSYS 2.0 LT is a control unit designed for generator electrical panels. This “all-in-one” unit combines all necessary functions: Three phase mains failure Eng... Lees meer
GENSYS 2.0 Paralleling unit with integrated PLC Image
GENSYS 2.0 Paralleling unit with integrated PLC
The GENSYS 2.0 is a control unit designed for generator electrical panels. This “all-in-one” unit combines all necessary functions: Three phases mains failure Engine... Lees meer
BSD 2.0 Remote monitoring box Image
BSD 2.0 Remote monitoring box
BSD 2.0 is a remote monitoring and controle box for GENSYS COMPACT PRIME and GENSYS 2.0 application. It communicates via GSM/GPRS/3G using a SIM card – compatible with most of the worldwide... Lees meer
GENSYS COMPACT MAINS All-in-one generator controller & mains paralleling unit Image
GENSYS COMPACT MAINS All-in-one generator controller & mains paralleling unit
The GENSYS COMPACT MAINS is a new panel-mounted generator controller fit for standby application. This new generation of controller is optimized for its ease of use. The GENSYS COMPACT MAINS bene... Lees meer
GENSYS 2.0 Demonstration Suitecase Image
GENSYS 2.0 Demonstration Suitecase
Our test and demonstration case has been developed to test and show all GENSYS 2.0’s type of applications. Inputs/outputs are wired on switch or lamps. Connections are made with a 230 VAC outlet.... Lees meer
CPA Three-phase active power converter Image
CPA Three-phase active power converter
The active power converter CPA measures the positive or negative power of a three-phase source with or without neutral. Designed to operate with versions GPRII & GPRIII load commander fo... Lees meer
SCR2.0 Synchroscope - Synch check relay Image
SCR2.0 Synchroscope - Synch check relay
The SCR2.0 is a microprocessor controlled synchroscope with programmable synch check relay in a DIN96 front panel mounted package. It monitors the voltage and frequency of 2 independent power netwo... Lees meer
GCR Digital power plant commander Image
GCR Digital power plant commander
The GCR allows the synchronizing, the coupling and the power control of one or several generating sets in parallel with one or several commercial powers. It can be used with the synchronise... Lees meer
C2S Auto synchroniser & safety column Image
C2S Auto synchroniser & safety column
This second generation of microprocessor module combines all the visualization and control functions needed to couple a generator to a bus bar manually: display of the phase, frequency and voltage ... Lees meer